Installing an air conditioner is a challenging task that requires professionalism, accuracy, and the right tools. To ensure that the air conditioner works properly and serves you for a long time, it should be professionally installed. This article provides detailed information about installing air conditioning devices by professionals like 7days aircon.
Step 1: Site Inspection and Assessment
Initial Evaluation:
Professionals always inspect the site before installing an air conditioner. They determine with precision what size space it is and where they can position indoor and outdoor units to maximize performance.
Load Calculation:
Technicians use load calculation to specify the proper size and capacity of the AC to be acquired. The room area, insulation, windows, and other climatic conditions are taken into account during this process.
Step 2: Choosing the Right Aircon
Selecting the Unit:
These experts will assist you in choosing an appropriate type or dimension of an air conditioner based on the load calculation you obtained earlier. They find options such as window units, and ductless mini-split systems, among others.
Energy Efficiency:
Experts usually recommend power-efficient models that consume less electrical energy. Look for a high SEER (Seasonal Energy Efficiency Ratio) rating in these units for energy-saving purposes.
Step 3: Preparing for Installation
Gathering Materials:
Technicians from https://www.airconservicing.org/ secure all necessary materials for installation, including the unit itself, mounting brackets, refrigerant lines, and electrical parts.
Safety Measures:
Professionals ensure they observe safety measures like switching off power supply lines when working.
Step 4: Installing the Indoor Unit
Mounting Bracket Installation:
In this case, technicians fit the mounting bracket so it is at a level that will support one end of the indoor unit.
Drilling Hole for Piping:
A hole in the wall through which the refrigerant piping, drainpipe, and electrical wire will pass is made. It is angled downwards for proper drainage.
Connecting Pipes and Wiring:
The indoor unit is connected to refrigerant pipes, piping for condensation water, and an electric circuit. These connections usually remain sealed and insulated to prevent leakages and ensure effectiveness.
Mounting the Indoor Unit:
Finally, they securely fix the indoor unit onto the bracket when its wires are pushed through the hole.
Step 5: Installing the Outdoor Unit
Choosing the Location:
Installing an outdoor unit requires sufficient ventilation from where it can be placed far away from direct sun or other obstructions. Usually, it is put on a concrete pad or mounted on brackets.
Connecting Refrigerant Lines:
Refrigeration lines from the internal unit are connected to external ones. Such tubes must have insulation to prevent heat escape and withstand all weather conditions.
Electrical Connections:
An outdoor unit should be appropriately linked to the power supply. All these power connections should be safe and meet safety requirements.
Mounting and Securing:
Place vibration pads underneath it before mounting this item firmly and making sure that it is leveled to minimize vibrations.
Step 6: Vacuuming and Charging the System
Evacuating Air and Moisture:
A vacuum pump helps to remove air and moisture trapped within air conditioning system lines. This process ensures the efficient running of this equipment without contamination problems.
Refrigerant Charging:
The right amount of refrigerants is then allowed into it. Gauges that measure pressure during those works ensure the correct levels are reached during the refilling procedure.
Step 7: Testing and Final Checks
Systems Testing:
The entire system is assessed to ensure it operates as desired. This also includes testing the coolers, air circulation levels, and thermostats.
Leak testing:
Technicians use special tools to detect refrigerant leakage and check all the connections and seals.
Final Inspection:
A final inspection occurs so that its installers can confirm that their work meets relevant safety and performance standards. The technicians will then explain in detail how the system works and tell you how to maintain it.
Step 8: Educating the Homeowner
Operating Instructions
Experts provide clear instructions for operating these air conditioning units, including details on thermostat usage, setting changes, and switching between modes.
Maintenance Tips
Homeowners receive tips on maintaining the unit, such as cleaning filters, scheduling regular servicing, and identifying signs of potential issues.
